Select Page

Clemco Power Gun H2O, Portable Wet Blasting!

Whether you are a contractor, do-it-yourselfer, or full-time blast operator, you’ll appreciate Clemco’s new Power Gun H2O’s lightweight and compact design and that it has nearly the power of a small pressure-blast system, which makes it ideal for wetblasting: • In small or confined spaces. • In elevated work areas. • In difficult to reach places. • On board ships. • With a limited air supply. • In situations that require quick setup and breakdown The new Clemco Power Gun H2O When a Full-Scale Wetblast System Is More Than You Need! • Easy to Use • Lightweight • Blast Wet or Dry

Bartell Global SPE Concrete Grinders

Industrial Minerals (NZ) Ltd are also distributors for the Bartell Global SPE Concrete Grinders. These units are built to prep concrete surfaces or remove coatings quickly & efficiently, with a range of machines for all job sizes. These machines have been used around the world for over 30 years, showing their proven quality! View the full range at: https://spe.bartellglobal.com/products/concrete-grinders/ or contact us for further information: Freephone NZ: 0800 636 372 or Freephone Australia 1800 309 734 or email [email protected]

Airless Wheel Blast Machine & Blast Booth

Our final Airless Wheel Blast Machine & Blast Booth installs for 2018 being worked on this week, ready to start the next lot of installs for 2019! Contact us today to discuss your surface preparation requirements!

Freephone NZ: 0800 636 372 or Freephone Australia 1800 309 734 or email [email protected] or visit www.mineralscorp.co.nz

 

Graco® Ecoquip® EQm

Our customer chose this Graco® Ecoquip® EQm vapour blaster to add to his abrasive blasting equipment fleet, for reduced media consumption and dust suppression on upcoming site and bridge blasting work! Contact us today to discuss your requirements or to arrange a demonstration with one of these industry leading machines!

For more information see our product page here: http://mineralscorp.co.nz/product/ecoquip-2-eqm/ or contact us on Freephone NZ: 0800 636 372 or Freephone Australia 1800 309 734.

Plastic Blasting Media

Industrial Minerals proudly offer a full range of Fischer GmbH Plastic Blasting Media manufactured according to MIL-P-85891. This video highlights some of the many applications and approvals for the Fischer GmbH Plastic Blasting Media.

Vapor Abrasive Blasting Demonstration

A recent vapor abrasive blasting demonstration at a shipyard with the Graco® Ecoquip® 2. They were impressed with how little water and media the machine used compared to other wet and dry blasting units they had tried before!

Recent Exhibition

Industrial Minerals are exhibiting at the ACA “Corrosion In the Process and Pipeline Industries” Event in New Plymouth today, showcasing our range of blasting equipment, abrasives and speciality tools like the RUST Cold Work Rated Grinder!

Graco® Ecoquip® EQp Vapor Blaster

We love the versatility of the Graco® Ecoquip® EQp Vapor Blaster, the below video shows just some of the potential uses for this model. Contact Industrial Minerals (NZ) Ltd today for a free demonstration!

 

18,000 m3/h Portable Dust Collector

Another recently supplied 18,000 m3/h portable dust collector supplied to our customer for on site dust extraction.
Industrial Minerals supply a full range of portable and booth integrated dust collectors, custom suited to your application.

Contact us today to discuss your dust extraction requirements! 

9000 m3/h Portable Dust Collector

A custom 9000 m3/h portable dust collector supplied to our customer for on site usage.
Industrial Minerals supply a full range of portable and booth integrated dust collectors.

Contact us today to discuss your dust extraction requirements! 

Introducing the NEW Ecoquip 2 EQP, Portable Vapor Abrasive Blasting Equipment

This affordable option in abrasive blasting is not only easy to use, but portable enough to take from one job to another. In addition, Graco’s vapor abrasive blast equipment reduces dust by up to 92% less than traditional dry blasting and uses very little water, making containment and cleanup of debris simple and less messy than power washers.

Whether you plan to remove graffiti and paint, or clean and prep a surface, it’s time to consider an alternative to your power washer, chemical cleaners or hand tools and use a machine that gets the job done quickly and effectively. With low compressor CFM requirements it has never been more affordable to get into vapor abrasive blasting with the new Graco Ecoquip 2 EQP!

Applications:
Steel and concrete surface preparation Graffiti removal Paint & stain removal Wood, concrete, steel cleaning Brick and patio cleaning Iron fence and railing preparation Stone and stucco stain removal Less dust. Less containment.

Contact us today to arrange a demonstration! Phone: 0800 646 372

Industrial Minerals (NZ) Ltd takes over IBIX New Zealand

Industrial Minerals has taken over IBIX New Zealand adding a range of speciality lightweight, single operator blast cleaning systems to their extensive blast equipment range.
For more information see our website at IBIX New Zealand and view our videos below from a recent demo day in Auckland

The first new generation Ecoquip 2 Vapor Blaster into New Zealand

Industrial Minerals has secured the first new generation Ecoquip 2 machine into New Zealand which is now ready for customer demonstration. The Ecoquip 2 offers 50% faster machine startup times, 50% faster machine reloading times & faster production rates than previous Ecoquip models & equipment with similar technology. Contact us today to view or arrange a demonstration!

New trailer mounted Geoblaster with 300CFM Atlas Copco Compressor

Industrial Minerals can build a trailer or truck mounted wet/vapor blasting setup to suit your individual requirements including the all new Ecoquip 2 Vapor Blaster. All trailer setups are individually weighted to ensure safe towbar weights are followed, making them a safe & easy tow. For maximum efficiency we use the manufacturers recommendation of a 300+CFM compressor to allow the use of larger blast nozzles and higher blast pressures. These offer greater productivity and will out perform smaller sized compressor units. Contact us today with your request and we would be happy to make a recommendation for your desired surface preparation requirements!